Exam Technique (GCSE & IGCSE Computer Science): Revision Notes and Worksheets

GCSE and IGCSE Computer Science exam technique: how the OCR and Cambridge papers work, command words, the OCR 8-mark question and the 0478 15-mark scenario.

Diagram comparing the exam papers: OCR J277 has two 1 hour 30 minute papers of 80 marks, with Paper 2 split into Section A (50 marks) and Section B (30 marks); Cambridge 0478 has two 1 hour 45 minute papers of 75 marks, with Paper 2 ending in a 15-mark scenario question.

Knowing the content is half the job. The other half is knowing what the paper will ask and how it is marked. This guide covers GCSE and IGCSE Computer Science exam technique: how the OCR J277 and Cambridge 0478 papers are structured, what each command word asks for, how to write the OCR 8-mark extended response, and how to tackle the Cambridge 15-mark scenario question. Each part has a worked example and a worksheet for your exam board.

OCR J277 students: you need R1, R3 and R4. Cambridge IGCSE 0478 students: you need R2, R3 and R6. R3 (command words) is for both boards; the other parts are for one board only. There is no part R5.

What does exam technique cover for OCR and Cambridge?

Exam technique is not a topic in either board's content list. It comes from the parts of each document that describe the exams: OCR J277 sections 2a and 3 (the papers, how answers must be written, command words, the extended response) and Cambridge 0478 sections 2 and 4 (the assessment overview, details of the papers, the scenario question and command words). The table below is based on the OCR J277 specification (version 3.1) and the Cambridge IGCSE 0478 syllabus for exams in 2026-2028 (version 6, September 2026), as checked in November 2026.

Part

Topic

OCR J277

Cambridge 0478

R1

How the J277 papers are structured (GCSE only)

2a, 3a, 3b

not on syllabus (see R2)

R2

How the 0478 papers are structured (IGCSE only)

not on specification (see R1)

Section 2 Assessment overview; section 4

R3

Command words (both boards)

3d Command words

Section 4 Command words

R4

8-mark extended response questions (GCSE only)

3a, 3d, 3k, with 1.6.1

not on syllabus

R6

The 15-mark scenario question (IGCSE only)

not on specification

Section 4 Scenario question; topics 7-10

R1: How are the OCR J277 Paper 1 and Paper 2 exams structured?

GCSE only. You sit two written papers, both in the same May/June exam series at the end of the course.

  • J277/01 Computer systems: 1 hour 30 minutes, 80 marks, 50% of the GCSE. Topics 1.1 to 1.6. Multiple choice, short and medium answer questions, plus one 8-mark extended response question (see R4).

  • J277/02 Computational thinking, algorithms and programming: 1 hour 30 minutes, 80 marks, 50%. Topics 2.1 to 2.5, in two sections:

    • Section A (50 marks): knowledge and understanding of concepts, applied to problems. You choose how to answer: pseudocode, flowcharts, bullet points, natural English, OCR Exam Reference Language or a high-level language. The focus is your logic, not exact syntax.

    • Section B (30 marks): Practical Programming skills: designing, writing, testing and refining programs. When a question asks you to write or refine code, you must use OCR Exam Reference Language or a high-level programming language. Pseudocode, natural English or bullet points get no marks there. Minor syntax errors are not penalised.

  • Program code printed in the papers is in OCR Exam Reference Language (ERL).

  • Both papers: no calculator and all questions are mandatory. Your grade comes from your total out of 160. If you retake the GCSE, you must retake both papers.

Worked example: plan your time on Paper 2 (GCSE only)

Paper 2 gives you 90 minutes for 80 marks: 90 ÷ 80 = 1.125 minutes per mark.

  • Step 1: Section A is 50 marks: 50 × 1.125 = 56.25, so about 56 minutes.

  • Step 2: Section B is 30 marks: 30 × 1.125 = 33.75, so about 34 minutes.

  • Step 3: the same rate on Paper 1 gives the 8-mark question 8 × 1.125 = 9 minutes. This is a plan of your own, not an OCR rule: check the clock when you finish Section A.

Practise R1: OCR questions · OCR mark scheme

R2: How are the Cambridge IGCSE 0478 Paper 1 and Paper 2 exams structured?

IGCSE only. You sit two written papers. Both are graded A* to G and both assess AO1, AO2 and AO3.

  • Paper 1 Computer Systems: 1 hour 45 minutes, 75 marks, 50%. Short-answer and structured questions on Topics 1 to 6.

  • Paper 2 Algorithms, Programming and Logic: 1 hour 45 minutes, 75 marks, 50%. Short-answer and structured questions on Topics 7 to 10, ending with a 15-mark unseen scenario question (see R6). Expect to spend about 30 minutes on it.

  • On Paper 2, coding answers must be written in pseudocode. Program code gets no marks, except in the 15-mark scenario question, where you may use pseudocode, Python, Visual Basic or Java. Any other language gets no marks.

  • Programming language syntax is not examined: the logic matters more than the syntax. Still be precise: a condition such as Mark > 50 is clearer than "if the mark is big".

  • Draw flowcharts and logic circuits with the standard symbols in section 4 of the syllabus. Pseudocode in the papers follows the section 4 format.

  • Both papers: all questions are compulsory, you answer on the question paper, and no calculators are allowed.

These facts are for exams in 2026, 2027 and 2028. The 2029-2031 syllabus changes Paper 2 (answers in Python, and the scenario question split into parts), so check which syllabus your exam year uses.

Worked example: plan your time on Paper 1 (IGCSE only)

Paper 1 gives you 105 minutes (1 hour 45 minutes) for 75 marks: 105 ÷ 75 = 1.4 minutes per mark.

  • Step 1: a 6-mark question: 6 × 1.4 = 8.4, so about 8 minutes.

  • Step 2: a 2-mark question: 2 × 1.4 = 2.8, so under 3 minutes. Do not write a page for it.

  • Step 3: on Paper 2 the scenario question is different: about 30 minutes for 15 marks is 2 minutes per mark, because you write a whole program. This is a plan of your own, not a Cambridge rule.

Practise R2: Cambridge questions · Cambridge mark scheme

R3: What are command words and what does each one ask for?

Both boards. A command word is the instruction word in a question, such as Describe or Explain. It tells you what kind of answer the examiner wants and how much depth. Both boards publish a list with meanings. Eleven words are on both lists: Calculate, Compare, Define, Describe, Evaluate, Explain, Give, Identify, Outline, Show (that) and State. The meanings are close, though not word for word the same.

Command word

What to write

Board

State, Identify

A short, specific answer: a name, value or feature. No explanation.

Both boards

Define

The precise meaning of a term.

Both boards

Describe

The main features, or an account of what happens. Reasons are not needed.

Both boards

Explain

Reasons or causes: say why or how, and link each point ("because...", "so...").

Both boards

Compare

Similarities and/or differences, mentioning both things in each point.

Both boards

Evaluate

Judge how good or important something is against criteria, and reach a conclusion.

Both boards

Calculate

Work out a numerical answer from the figures given, and show your working (OCR's meaning asks for the stages).

Both boards

Outline

A brief summary of the main points.

Both boards

Discuss

A balanced review of a range of arguments, with a clear conclusion supported by evidence.

GCSE only

Justify

Valid reasons or evidence to support an answer or a choice.

GCSE only

Refine

Improve, modify or make more efficient (often code).

GCSE only

Suggest

Apply what you know to a situation with a range of valid answers, and make proposals.

IGCSE only

Demonstrate

Show how, or give an example.

IGCSE only

GCSE only: OCR's list is much longer, with 29 entries. As well as Discuss, Justify and Refine it includes words such as Analyse, Complete, Convert, Design, List and Tick.

IGCSE only: Cambridge's list has 13 words. Demonstrate and Suggest are the only two that are not on OCR's list.

Diagram of four steps of increasing depth: State or Identify (a short answer), Describe (the main features), Explain (reasons, using because or so), and Discuss or Evaluate (both sides and a supported conclusion), each with an example answer about an embedded system in a washing machine.

Worked example: one topic, three command words (both boards)

Embedded systems are on both specifications (OCR 1.1.3, Cambridge 3.1.5). Watch how the command word changes the answer.

  • Step 1: "State one example of an embedded system." [1] The control system in a washing machine. That is all: no explanation.

  • Step 2: "Describe an embedded system." [2] A computer system built into a larger device. It carries out one dedicated function. These are features; no reasons are needed.

  • Step 3: "Explain why a washing machine uses an embedded system rather than a general-purpose computer." [2] It only has to run its wash programs, so it can use a small, low-cost processor that uses little power. A point and its reason.

  • Step 4: check your answer. If an Explain answer has no "because" or "so", it is probably a Describe answer.

Practise R3: OCR questions · OCR mark scheme · Cambridge questions · Cambridge mark scheme

R4: How do you answer the 8-mark question in OCR J277 Paper 1?

GCSE only. J277/01 has one 8-mark extended response question, marked with an asterisk (*). It tests whether you can build a sustained and coherent line of reasoning. It can come from any Paper 1 topic (1.1 to 1.6); in recent papers it has been about the impacts of digital technology (1.6.1): ethical, legal, cultural, environmental and privacy issues, and the laws. See the impacts and law revision notes.

It is not marked one mark per point. The examiner reads the whole answer and places it in a mark band, then picks a mark within it. In OCR's mark schemes the bands are:

  • High (6 to 8 marks): thorough, accurate knowledge, applied to the scenario throughout; both sides weighed up; a clear, logical line of reasoning that reaches a supported conclusion.

  • Mid (3 to 5 marks): reasonable knowledge, applied to the scenario some of the time; some structure; may be one-sided.

  • Low (1 to 2 marks): basic knowledge; mostly general points, listed rather than discussed.

  • 0 marks: nothing worth credit.

The command word is often Discuss: a balanced review of a range of arguments, with conclusions presented clearly and supported by evidence. To write one:

  • Cover every bullet point the question gives you.

  • For each point, write point, explanation, impact in context: what happens, why, and who it affects in this scenario.

  • Cover both sides: benefits and drawbacks, for different groups (users, the organisation, wider society).

  • Name the issue type (ethical, legal, cultural, environmental, privacy) and, where it fits, the law. The laws on J277, as at November 2026: the Data Protection Act 2018, the Computer Misuse Act 1990 and the Copyright, Designs and Patents Act 1988.

  • Finish with a conclusion that follows from your points. A supported middle position is fine.

Diagram of how to build an 8-mark answer: strands of point, explanation and impact in context, some for and some against, lead to a supported conclusion; beside them, the three mark bands: high 6 to 8, mid 3 to 5, low 1 to 2.

Worked example: develop one strand (GCSE only)

Scenario: a library service plans to replace its staffed help desks with an online chatbot. "Discuss whether it should go ahead."

  • Step 1 (point): some library users may not be able to use the chatbot.

  • Step 2 (explanation): because not everyone has internet access, a device, or the confidence to use one. This is the digital divide, an ethical issue.

  • Step 3 (impact in context): so these users, often the people who most need help, lose the service, and the library fails part of its community.

  • Step 4 (the other side): however, the chatbot can answer questions 24 hours a day, so many users get help without waiting for opening hours.

  • Step 5 (conclusion): overall, the library should add the chatbot but keep a smaller help desk, so that no user is shut out. A top-band answer builds several strands like this, including privacy (the chat logs are personal data, covered by the Data Protection Act 2018).

Practise R4: OCR questions · OCR mark scheme

R6: How do you answer the 15-mark scenario question in Cambridge 0478 Paper 2?

IGCSE only. The final question on Paper 2 is a 15-mark unseen scenario question. You write an algorithm, as pseudocode or program code, for the context given, using the methods and concepts in topics 7 to 10. Expect to spend about 30 minutes on it.

  • Language: pseudocode, Python, Visual Basic or Java. Any other language gets no marks.

  • What it usually involves: arrays given by name (often a 1D array of names alongside a 2D array of data) and a list of requirements that need standard methods: input with validation, totalling, counting, average, maximum or minimum, and output with messages. Revise these in the programming revision notes.

  • Follow the question's rules: use the identifiers given, exactly; you need not declare arrays or variables if the question says so; every input and output needs a suitable message; add comments to explain how your code works.

  • How it is marked (exams to 2028): the whole program is marked by best fit in two grids, as in Cambridge's mark schemes. AO2 (up to 9 marks): are all the requirements covered by appropriate techniques, with data structures that store all the data? AO3 (up to 6 marks): is the program commented, with meaningful identifiers, in a logical order, accurate and complete? 9 + 6 = 15. Minor syntax errors are ignored.

Common ways to lose marks: validating with a single IF (it checks only once); outputting only one name when several share the highest value; resetting a total inside the wrong loop; inputs with no prompts; no comments; renaming the given arrays. From 2029 the syllabus changes this question (Python only, split into parts, marked by points).

Worked example: plan a scenario answer (IGCSE only)

Scenario: a plant nursery measures 20 seedlings once a week for 4 weeks. The names are in the 1D array PlantName[] and the heights in the 2D array Heights[]. R1: input and validate each height (0 to 50 cm). R2: total and average for each plant. R3: count the plants under 10 cm in week 4. R4: find the tallest height in week 4 and output every plant with it.

  • Step 1: number the requirements and underline the array names you must use.

  • Step 2: match each requirement to a standard method. R1: nested loops, with validation in a condition-controlled loop. R2: totalling, then the average. R3: counting. R4: finding the maximum, then a second loop to output every plant that has it.

  • Step 3: write one section per requirement, each starting with a comment. R1 in Cambridge pseudocode:

// R1: input each height and ask again until it is from 0 to 50
FOR Plant ← 1 TO 20
    FOR Week ← 1 TO 4
        REPEAT
            OUTPUT "Height of ", PlantName[Plant], " in week ", Week, " (0 to 50 cm)"
            INPUT Height
        UNTIL Height >= 0 AND Height <= 50
        Heights[Plant, Week] ← Height
    NEXT Week
NEXT Plant
// R1: input each height and ask again until it is from 0 to 50
FOR Plant ← 1 TO 20
    FOR Week ← 1 TO 4
        REPEAT
            OUTPUT "Height of ", PlantName[Plant], " in week ", Week, " (0 to 50 cm)"
            INPUT Height
        UNTIL Height >= 0 AND Height <= 50
        Heights[Plant, Week] ← Height
    NEXT Week
NEXT Plant
// R1: input each height and ask again until it is from 0 to 50
FOR Plant ← 1 TO 20
    FOR Week ← 1 TO 4
        REPEAT
            OUTPUT "Height of ", PlantName[Plant], " in week ", Week, " (0 to 50 cm)"
            INPUT Height
        UNTIL Height >= 0 AND Height <= 50
        Heights[Plant, Week] ← Height
    NEXT Week
NEXT Plant
  • Step 4: before you finish, tick off R1 to R4 against your code, and check every INPUT has a prompt and every OUTPUT has a message.

Practise R6: Cambridge questions · Cambridge mark scheme

Common exam mistakes in exam technique

  • (GCSE) Writing a Section B "write" or "refine" answer in pseudocode or bullet points. It gets no marks: use ERL or a high-level language.

  • (IGCSE) Answering an ordinary Paper 2 coding question in Python. Only pseudocode scores there; Python, Visual Basic and Java are accepted only in the 15-mark scenario question.

  • Answering Describe with reasons, or Explain without reasons. An Explain point needs a "because" or a "so".

  • Compare: writing about only one of the two things. Each point should mention both.

  • Calculate: writing only the final answer. Show your working; it can still earn marks if the final answer is wrong.

  • (GCSE) 8-mark question: general points with no link to the scenario, only one side, or no conclusion. These keep an answer out of the top band.

  • (IGCSE) 15-mark question: validating with a single IF, or outputting only one name when several share the highest value.

Quick recap

  • R1: (GCSE only) J277 has two 1 hour 30 minute, 80-mark papers; Paper 2 Section A is 50 marks, Section B is 30 marks; Section B write and refine answers must be in ERL or a high-level language.

  • R2: (IGCSE only) 0478 has two 1 hour 45 minute, 75-mark papers; Paper 2 coding answers are in pseudocode, except the 15-mark scenario (also Python, Visual Basic or Java).

  • R3: command words set the kind of answer: State is short, Describe gives features, Explain gives reasons; Discuss, Justify and Refine GCSE only; Suggest and Demonstrate IGCSE only.

  • R4: (GCSE only) the 8-mark question is marked in bands; build point, explanation and impact in context, cover both sides and finish with a supported conclusion.

  • R6: (IGCSE only) the 15-mark scenario takes about 30 minutes; match each requirement to a standard method, use the given names, prompt every input, comment the code.

Download the whole module

Frequently asked questions

Which parts of exam technique do I need for OCR J277 and for Cambridge 0478?

OCR J277 students need R1 (the J277 papers), R3 (command words) and R4 (the 8-mark question). Cambridge 0478 students need R2 (the 0478 papers), R3 (command words) and R6 (the 15-mark scenario question).

How long are the GCSE and IGCSE Computer Science exams?

OCR J277 has two papers, each 1 hour 30 minutes and 80 marks. Cambridge IGCSE 0478 has two papers, each 1 hour 45 minutes and 75 marks. Calculators are not allowed on either board.

Can I write Python in the Computer Science exam?

For OCR J277 Paper 2 you can use any high-level language you have studied, or OCR Exam Reference Language, and Section B write and refine questions must use one of these. For Cambridge 0478 (exams 2026 to 2028), coding answers must be in pseudocode, except the 15-mark scenario question, which also accepts Python, Visual Basic or Java.

What is the difference between describe and explain in an exam question?

Describe asks for the main features, or an account of what happens, without reasons. Explain asks for reasons or causes, so each point needs to say why or how, often with "because" or "so".

How is the 8-mark question marked in OCR GCSE Computer Science?

The whole answer is placed in a mark band (high 6 to 8, mid 3 to 5, low 1 to 2) by the quality of its reasoning, not one mark per point. The top band needs knowledge applied to the scenario, both sides weighed up and a supported conclusion.

How is the 15-mark scenario question marked in Cambridge IGCSE 0478?

For exams up to 2028 the whole program is marked by best fit in two grids: up to 9 marks (AO2) for covering every requirement with suitable techniques and data structures, and up to 6 marks (AO3) for comments, meaningful identifiers and accurate, logical code. Minor syntax errors are ignored.

Previous module: Boolean logic revision notes.

More help: browse the GCSE Computer Science revision hub.