Systems Architecture (GCSE & IGCSE Computer Science): Revision Notes and Worksheets
GCSE and IGCSE Computer Science systems architecture: the CPU, registers, Von Neumann, fetch-execute, performance and embedded systems, with worksheets.

Every app you open, every key you press and every frame of a game comes down to one chip doing the same three-step job billions of times a second. This guide covers GCSE and IGCSE systems architecture for OCR J277 and Cambridge IGCSE 0478: what the CPU is, what sits inside it, how it fetches and runs instructions, and what makes one processor faster than another. Each part has a worked example and a worksheet for your exam board.
What does systems architecture cover for OCR and Cambridge?
Systems architecture is how the parts of a computer are arranged and how they work together to run a program. Both boards ask about the purpose of the CPU, its components (ALU, control unit, registers, cache), Von Neumann architecture, the cycle the CPU repeats to run instructions, the three factors that affect CPU performance, and embedded systems. Cambridge IGCSE also asks about the three buses, register-by-register transfers in the cycle, the CIR, and instruction sets. The table below is based on the OCR J277 specification (version 3.1) and the Cambridge IGCSE 0478 syllabus for 2026-2028, as checked in November 2026.
Part | Topic | OCR J277 | Cambridge 0478 |
|---|---|---|---|
A1 | Computer systems and the CPU | 1.1.1 | 3.1.1 |
A2 | Inside the CPU | 1.1.1 | 3.1.2 |
A3 | Von Neumann architecture (buses IGCSE only) | 1.1.1 | 3.1.2 |
A4 | Fetch-execute / fetch-decode-execute cycle | 1.1.1 | 3.1.2 |
A5 | CPU performance | 1.1.2 | 3.1.3 |
A6 | Embedded systems | 1.1.3 | 3.1.5 |
A7 | Instruction sets and microprocessors | IGCSE only | 3.1.1, 3.1.4 |
A1: What is a computer system and what does the CPU do?
A computer system is hardware and software working together to take input, process it, and output or store the result. Hardware is the physical parts you can touch; software is the programs, which are sets of instructions that run on the hardware.
The CPU (central processing unit) processes the instructions and data that are input so that a result can be output. Its purpose is to run programs by fetching instructions from main memory and executing them, over and over. While a program runs, its instructions and data are held in main memory (RAM), and the CPU fetches them from there.
GCSE only: OCR J277 calls this the fetch-execute cycle.
IGCSE only: Cambridge 0478 calls it the fetch-decode-execute (FDE) cycle.
Worked example: input, process, output in a self-checkout scale
Step 1, input: a shopper places apples on the scale; a sensor sends the weight to the computer.
Step 2, process: the CPU runs the instructions that multiply the weight by the price per kilogram.
Step 3, output: the total appears on the screen and is stored in the transaction record.
Practise A1: OCR questions · OCR mark scheme · Cambridge questions · Cambridge mark scheme
A2: What is inside the CPU?
The CPU contains the ALU, the control unit and a set of registers. The ALU (arithmetic logic unit) carries out arithmetic, logical operations and comparisons. The control unit (CU) decodes instructions and sends control signals to coordinate the other components.
Registers are tiny, very fast storage locations inside the CPU, and each holds one item. The program counter (PC) holds the address of the next instruction. The MAR (memory address register) holds the address of the memory location being read from or written to. The MDR (memory data register) holds the data or instruction fetched from, or about to be written to, memory. The accumulator holds the results of ALU operations.
Both boards: cache is a small, fast memory that holds frequently used data and instructions. OCR J277 lists it here as a CPU component; Cambridge 0478 covers it under CPU performance (see A5).
IGCSE only: Cambridge 0478 adds the CIR (current instruction register), which holds the instruction currently being decoded and executed. Cambridge writes the accumulator as ACC.
Worked example: address or data?
A question asks which registers hold an address and which hold data.
Step 1: ask "does it say where in memory, or what is stored there?"
Step 2: PC and MAR say where, so they hold addresses.
Step 3: MDR and the accumulator hold the value itself, so they hold data (the MDR can also hold an instruction).
Practise A2: OCR questions · OCR mark scheme · Cambridge questions · Cambridge mark scheme
A3: What is Von Neumann architecture?
In Von Neumann architecture, program instructions and data are stored together in the same main memory. This is the stored program concept: a program is loaded into memory, then its instructions are fetched and executed one at a time. Memory is a set of locations, each with a unique address, and each location holds either data or an instruction.
IGCSE only: the CPU is linked to memory by three buses. The address bus carries addresses from the MAR to memory and is one-way (unidirectional). The data bus carries data and instructions between memory and the MDR and is two-way (bidirectional). The control bus carries control signals, such as read, write and clock signals, and is two-way.
Worked example: reading location 12 (IGCSE)
Step 1: the address 12 is placed in the MAR and sent along the address bus.
Step 2: the control unit sends a "read" signal along the control bus.
Step 3: the contents of location 12 travel back along the data bus into the MDR.
Practise A3: OCR questions · OCR mark scheme · Cambridge questions · Cambridge mark scheme
A4: How does the fetch-execute cycle work?
The CPU runs a program by repeating one cycle: fetch the next instruction from main memory using the address in the PC, add one to the PC, decode the instruction in the control unit, then execute it. Execution might be an ALU calculation (with the result stored in the accumulator) or loading or storing data. The cycle then repeats for the next instruction.

GCSE only: OCR calls it the fetch-execute cycle. You need the actions at each stage and what each register stores (data or address), but OCR J277 says you do not need to know how data passes between registers.
IGCSE only: Cambridge calls it the fetch-decode-execute cycle and expects the register transfers and buses:
The address in the PC is copied to the MAR.
The address is sent along the address bus; a read signal goes on the control bus.
The instruction at that address comes back along the data bus into the MDR.
The instruction is copied from the MDR to the CIR, and the PC is incremented.
The CU decodes the instruction in the CIR.
The instruction is executed; the CU sends signals and the ALU processes any data, with results in the accumulator.
Worked example: one instruction, step by step
The PC holds 20 and location 20 holds the instruction "ADD 30".
Fetch: 20 goes into the MAR, the instruction ADD 30 arrives in the MDR (IGCSE: and moves to the CIR), and the PC becomes 21.
Decode: the CU works out that it must add the value stored at location 30.
Execute: the value at 30 is fetched, the ALU adds it to the accumulator, and the result stays in the accumulator. The next cycle starts at address 21.
Practise A4: OCR questions · OCR mark scheme · Cambridge questions · Cambridge mark scheme
A5: What affects CPU performance?
Three things affect CPU performance: clock speed, the number of cores and cache size. Clock speed is the number of cycles the CPU carries out per second, measured in hertz, so 3.5 GHz means 3.5 billion cycles per second. A higher clock speed means more instructions are executed per second, although the CPU produces more heat.
Each core is an independent processing unit that can fetch, decode and execute instructions, so more cores can process more instructions at the same time. The gain is limited when software cannot split the task between cores. A larger cache means more of the data and instructions the CPU needs are found in cache, so there are fewer slower fetches from RAM.
GCSE only: OCR J277 asks for the effect of changing these characteristics on their own or in combination.
Both boards: if cache sizes are quoted, OCR uses 1 KB = 1,000 bytes; Cambridge uses 1 KiB = 1,024 bytes.
Worked example: which CPU suits a video editor?
CPU X has 4 cores at 2.0 GHz. CPU Y has 2 cores at 3.5 GHz. Both have the same cache.
Step 1: in total, X can run 4 x 2.0 = 8 billion cycles per second; Y can run 2 x 3.5 = 7 billion.
Step 2: video editing can be split across cores, so X's extra cores are used well.
Step 3: X is the better choice here. For a program that can only use one core, Y would be faster, because each core runs at a higher clock speed.
Practise A5: OCR questions · OCR mark scheme · Cambridge questions · Cambridge mark scheme
A6: What is an embedded system?
An embedded system is a computer system built into a larger device to perform a dedicated function. A general-purpose computer, such as a laptop, can run many different programs. Embedded systems are usually small, low power, low cost and very reliable, are often real-time, and keep their program in ROM (firmware) that the user does not change. This part is the same for both boards.
Worked example: is it embedded?
A smart thermostat reads the room temperature and switches the boiler on or off.
Step 1, dedicated function: it only controls heating.
Step 2, part of a larger device: it is built into the heating system.
Step 3, conclusion: it is an embedded system. A tablet used to browse and play games is not, because it is general purpose.
Practise A6: OCR questions · OCR mark scheme · Cambridge questions · Cambridge mark scheme
A7 (IGCSE only): What are instruction sets and microprocessors?
OCR J277 students can skip this part. A microprocessor is an integrated circuit on a single chip that acts as the CPU. An instruction set is the list of all the commands a CPU can process, and those commands are machine code (binary). A CPU can only execute instructions in its own instruction set, so different types of CPU can need different machine code. In the FDE cycle, the CU decodes each instruction from the instruction set before it is executed.
Worked example: why a program will not run
A program compiled for a phone's processor is copied to a desktop with a different type of CPU. It will not run, because its machine code instructions belong to the phone CPU's instruction set, which the desktop CPU cannot decode.
Practise A7: Cambridge questions · Cambridge mark scheme
Common exam mistakes in systems architecture
Saying the CPU fetches "programs" or "information": it fetches instructions and data from memory.
Thinking the program counter counts programs: it holds the address of the next instruction.
Writing just "clock", "cores" or "cache": name the characteristic, such as clock speed, number of cores or cache size, and say its effect.
Saying a higher clock speed runs more cycles at the same time: that is cores; clock speed means more cycles per second.
(IGCSE) Listing FDE stages without the register moves (PC to MAR, MDR to CIR, PC incremented), or calling the address bus two-way.
Describing a general-purpose computer as embedded: it needs a dedicated function within a larger device, applied to the device in the question.
Quick recap
A1: a computer system is hardware plus software; the CPU processes instructions and data by fetching and executing.
A2: ALU, CU, cache, registers PC, MAR, MDR, accumulator, plus CIR (IGCSE).
A3: Von Neumann stores instructions and data in the same memory; address, data and control buses (IGCSE).
A4: fetch, decode, execute, repeat; PC incremented each fetch; register transfers for IGCSE only.
A5: performance depends on clock speed, number of cores and cache size.
A6: embedded system = dedicated function inside a larger device.
A7 (IGCSE): an instruction set is the machine code commands a CPU can run; a microprocessor is a CPU on one chip.
Download the whole module
Frequently asked questions
What is the difference between the fetch-execute and fetch-decode-execute cycle?
They are the same cycle with different names. OCR J277 calls it the fetch-execute cycle, and Cambridge IGCSE 0478 calls it the fetch-decode-execute (FDE) cycle and asks for more detail about registers and buses.
Do I need to learn the buses for GCSE systems architecture?
Only for Cambridge IGCSE. The address, data and control buses are in the Cambridge 0478 syllabus but not in OCR J277.
What does the program counter hold?
The program counter holds the memory address of the next instruction to be fetched. It is incremented during each fetch.
Does a faster clock speed always make a computer faster?
Usually, because more instructions are executed per second, but other factors matter too. The number of cores, the cache size and whether the software can use several cores all affect performance.
Is a smartphone an embedded system?
No. A smartphone is a general-purpose computer because it runs many different apps, but it may contain embedded systems, such as the controller in its camera.
Next module: Memory and storage revision notes.
More help: browse the GCSE Computer Science revision hub.